[Mar-2018-Cisco Updated] Discount Cisco SWITCH 300-115 Dumps Doc Exam Collection 100% Pass With A High Score Youtube Study 543Q Offer(1-5)

Do you want to improve your Cisco 300-115 dumps in a shorter time as soon as possible but lacking of proper training materials? Discount pass4itsure Cisco 300-115 dumps doc exam collection 100% pass Implementing Cisco IP Switched Networks with a high score Youtube study. The Implementing Cisco IP Switched Networks (300-115 SWITCH) exam is a 120 minutes (30-40 questions) assessment in pass4itsure that is associated with the CCNP Routing and Switching, CCDP certification. It is difficult to find right Cisco https://www.pass4itsure.com/300-115.html dumps answers. “Implementing Cisco IP Switched Networks” is the exam name of Pass4itsure Cisco 300-115 dumps test which designed to help candidates prepare for and pass the Cisco 300-115 exam.

[Mar-2018-Cisco 300-115 PDF Dumps Updated From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWLW41Sk5QSDdPTFU

[Mar-2018-Cisco 200-105 PDF Dumps Updated From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWWWw0QXQxY3R1X1E
300-115 dumps

Welcome to Pass4itsure Blog: Free Cisco 300-115 Dumps(1-5)

QUESTION 1
What is the maximum number of switches that can be stacked using Cisco StackWise?
A. 4
B. 5
C. 8
D. 9
E. 10
F. 13
300-115 exam Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
Up to 9 Cisco Catalyst switches can be stacked together to build single logical StackWise switch since Cisco IOS XE Release 3.3.0SE. Prior to Cisco IOS XE Release3.3.0SE, up to 4 Cisco Catalyst switches could be stacked together.

QUESTION 2
A network engineer wants to add a new switch to an existing switch stack. Which configuration must be added to the new switch before it can be added to the switch stack?
A. No configuration must be added.
B. stack ID
C. IP address
D. VLAN information
E. VTP information
Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
Switch Stack Offline Configuration
You can use the offline configuration feature to provision (to supply a configuration to) a new switch before it joins the switch stack. You can configure in advance the stack member number, the switch type, and the inter- faces associated with a switch that is not currently part of the stack. The configuration that you create on the switch stack is called the provisioned configuration . The switch that is added to the switch stack and that re- ceives this configuration is called the provisioned
switch . You manually create the provisioned configuration through the switch stack-member-number provision type global configuration command. The provisioned configuration is automatically created when a switch is added to a switch stack and when no provisioned configuration exists. When you configure the interfaces associated with a provisioned switch (for example, as part of a VLAN), the switch stack accepts the configuration, and the information appears in the running configuration. The interface associated with the provisioned switch is not active, operates as if it is administratively shut down, and the no shutdown interface configuration command does not return it to active service. The interface associated with the provisioned switch does not appear in the display of the specific feature; for example, it does not appear in the show vlan user EXEC command output. The switch stack retains the provisioned configuration in the running configuration whether or not the provi- sioned switch is part of the stack. You can save the provisioned configuration to the startup configuration file by entering the copy running-config startup-config privileged EXEC command. The startup configuration
file ensures that the switch stack can reload and can use the saved information whether or not the provisioned switch is part of the switch stack. Effects of Adding a Provisioned Switch to a Switch Stack When you add a provisioned switch to the switch stack, the stack applies either the provisioned configuration or the default configuration. Table 5-1 lists the events
that occur when the switch stack compares the provisioned configuration with the provisioned switch. Table 5-1 Results of Comparing the Provisioned Configuration with the Provisioned Switch
Scenario Result
The stack member num- 1. If the stack member number The switch stack applies bers and the switch types of the provisioned switch the provisioned configura match. matches the stack member num- tion to the provisioned ber in the provisioned configura- switch and adds it to the tion on the stack, and stack.
2. If the switch type of the provi sioned switch matches the switch type in the provisioned configura tion on the stack.
The stack member num- 1. If the stack member number The switch stack applies bers match but the switch of the provisioned switch the default configuration to types do not match. matches the stack member num- the provisioned switch and ber in the provisioned configuration on the stack, but adds it to the stack.
2. The switch type of the provi- The provisioned configura- sioned switch does not match the tion is changed to reflect switch type in the provisioned the new information. configuration on the stack. The stack member num- The switch stack applies
ber is not found in the pro- the default configuration to visioned configuration. the provisioned switch and adds it to the stack. The provisioned configuration is changed to reflect the new information. The stack member num- The stack master assigns a new The switch stack applies ber of the provisioned stack member number to the pro- the provisioned configura- switch is in conflict with an visioned switch. tion to the provisioned existing stack member. switch and adds it to the
The stack member numbers and stack.
1. If the new stack member tion is changed to reflect number of the provisioned switch the new information. matches the stack member num ber in the provisioned configuration on the stack, and
2. If the switch type of the provisioned switch matches the switch type in the provisioned configuration on the stack. The stack member numbers The switch stack applies match, but the switch types do the default configuration to not match: the provisioned switch and adds it to the stack.

QUESTION 3
What percentage of bandwidth is reduced when a stack cable is broken?
A. 0
B. 25
C. 50
D. 75
E. 100
300-115 dumps Correct Answer: C
Explanation
Explanation/Reference:
Explanation:
Physical Sequential Linkage
The switches are physically connected sequentially, as shown in Figure 3. A break in any one of the cables will result in the stack bandwidth being reduced to half of its full capacity. Subsecond timing mechanisms detect traffic problems and immediately institute failover. This mechanism restores dual path flow when the timing mechanisms detect renewed activity on the cable. Figure 3. Cisco StackWise Technology Resilient Cabling
300-115 dumps

QUESTION 4
Refer to the exhibit.
300-115 dumps
Which set of configurations will result in all ports on both switches successfully bundling into an EtherChannel?
A. switch1
channel-group 1 mode active
switch2
channel-group 1 mode auto
B. switch1
channel-group 1 mode desirable
switch2
channel-group 1 mode passive
C. switch1
channel-group 1 mode on
switch2
channel-group 1 mode auto
D. switch1
channel-group 1 mode desirable
switch2
channel-group 1 mode auto
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
The different etherchannel modes are described in the table below:
Mode Description
active Places an interface into an active negotiating state, in which the interface starts negotiations with other interfaces by sending LACP packets. auto Places an interface into a passive negotiating state, in which the interface re- sponds to PAgP packets it receives but does not start PAgP packet negotiation. This setting minimizes the transmission of PAgP packets.
desirable Places an interface into an active negotiating state, in which the interface starts negotiations with other interfaces by sending PAgP packets. on Forces the interface into an EtherChannel without PAgP or LACP. With the on mode, a usable EtherChannel exists only when an interface group in the on mode is connected to another interface group in the on mode.
passive Places an interface into a passive negotiating state, in which the interface re- sponds to LACP packets that it receives, but does not start LACP packet negotiation. This setting minimizes the transmission of LACP packets. Both the auto and desirable PAgP modes allow interfaces to negotiate with partner interfaces to determine if they can form an EtherChannel based on criteria such as interface speed and, for Layer 2 EtherChannels, trunking state and VLAN numbers. Interfaces can form an EtherChannel when they are in different PAgP modes as long as the modes are compatible. For example:
An interface in the desirable mode can form an EtherChannel with another interface that is in the desirable or auto mode.
An interface in the auto mode can form an EtherChannel with another interface in the desirable mode.
An interface in the auto mode cannot form an EtherChannel with another interface that is also in the auto mode because neither interface starts PAgP negotiation.
An interface in the on mode that is added to a port channel is forced to have the same characteristics as the already existing on mode interfaces in the channel.

QUESTION 5
Refer to the exhibit.
300-115 dumps
How can the traffic that is mirrored out the GigabitEthernet0/48 port be limited to only traffic that is received or transmitted in VLAN 10 on the GigabitEthernet0/1 port?
A. Change the configuration for GigabitEthernet0/48 so that it is a member of VLAN 10.
B. Add an access list to GigabitEthernet0/48 to filter out traffic that is not in VLAN 10.
C. Apply the monitor session filter globally to allow only traffic from VLAN 10.
D. Change the monitor session source to VLAN 10 instead of the physical interface.
300-115 pdf Correct Answer: C
Explanation
Explanation/Reference:
Explanation:
To start a new flow-based SPAN (FSPAN) session or flow-based RSPAN (FRSPAN) source or destination session, or to limit (filter) SPAN source traffic to specific VLANs, use the monitor session filter global configuration command.
Usage Guidelines
You can set a combined maximum of two local SPAN sessions and RSPAN source sessions. You can have a total of 66 SPAN and RSPAN sessions on a switch or switch stack. You can monitor traffic on a single VLAN or on a series or range of ports or VLANs. You select a series or range of VLANs by using the [ , | -] options. If you specify a series of VLANs, you must enter a space before and after the comma. If you specify a range of VLANs, you must enter a space before and after the hyphen ( -). VLAN filtering refers to analyzing network traffic on a selected set of VLANs on trunk source ports. By default, all VLANs are monitored on trunk source ports. You can use the monitor session session_number filter vlan vlan-id command to limit SPAN traffic on trunk source ports to only the specified VLANs. VLAN monitoring and VLAN filtering are mutually exclusive. If a VLAN is a source, VLAN filtering cannot be enabled. If VLAN filtering is configured, a VLAN cannot become a source.
Reference:

300-115 dumps

See What Our Customers Are Saying:

We at Pass4itsure are committed to our customer’s success. There are 50,000+ customers who used this preparation material for the preparation of various certification exams and this number of customers is enough for new candidates to trust in these products. Don’t leave your fate to 300-115 dumps, you should sooner trust a Cisco 300-115 dump or some random Cisco 300-115 download than to depend on a thick Implementing Cisco IP Switched Networks (SWITCH v2.0).  Our Cisco 300-115 dumps are created with utmost care and professionalism. We utilize the experience and knowledge of a team of industry professionals from leading organizations all over the world.

300-115 dumps

“Implementing Cisco IP Switched Networks”, also known as 300-115 exam, is a Cisco certification which covers all the knowledge points of the real Cisco exam. Every version of 300-115 dumps study materials that we provide to you has its own advantage: the PDF version has no equipment limited, which can be read anywhere. Pass4itsure Cisco 300-115 dumps exam questions answers are updated (543 Q&As) are verified by experts. The https://www.pass4itsure.com/300-115.html dumps software version can be available installed on unlimited number devices. The associated certifications of 300-115 dumps is CCNP Routing and Switching, CCDP.

Pass4itsure Cisco 300-115 Dumps Exam Youtube Free Online Test Here: https://youtu.be/yzZU1yP0zbg

pass4itsure 300-115 dumps

Compared with other brands, Pass4itsure has up to dated exam information, affordable price, instant exam PDF files downloaded, error correction, unlimited install,etc. Naturally the best training is from Cisco 300-115 CBT at Cisco – far from being a wretched Implementing Cisco IP Switched Networks (SWITCH v2.0) brain dump, the Cisco 300-115 cost is rivaled by its value – the ROI on the Cisco 300-115 exam papers is tremendous, with an absolute guarantee to pass Cisco 300-115 tests on the first attempt. Such as Discount Pass4itsure Cisco 300-115 Dumps Doc, Real Cisco 300-115 Dumps Exam Collection 100% Pass With A High Score, We Help You Pass Implementing Cisco IP Switched Networks. Simple and Easy! To take advantage of the guarantee, simply contact Customer Support, requesting the exam you would like to claim. The online version can use on any electronic equipment there is network available; the software version can simulate the real 300-115 exam environment to let you have more real feeling to 300-115 dumps real exam. Send us a scanned copy of your failed exam and we will promptly proceed to refund.Pass4itsure guarantee insures your success otherwise get your MONEYBACK!